JB045CP0 tandem thrust bearing 4.500x5.125x0.3125 Inch
Enjoy High Margins on Competitive 26x10x8 TANDEM THRUST BEARING Pioneer Machinery Source Pricing.Great Wholesale Products at Low 26x10x8 Size (mm) Costs.
| Bearing number: | 7000 ACE/P4A |
| Size (mm): | 26x10x8 |
| Bore Diameter (mm): | 26 |
| Outer Diameter (mm): | 10 |
| Width (mm): | 8 |
| d: | 10 mm |
| D: | 26 mm |
| B: | 8 mm |
Product Details
| Bearing number | 7000 ACE/P4A |
| Size (mm) | 26x10x8 |
| Bore Diameter (mm) | 26 |
| Outer Diameter (mm) | 10 |
| Width (mm) | 8 |
| d | 10 mm |
| D | 26 mm |
| B | 8 mm |
| d1 | 15.6 mm |
| d2 | 14.5 mm |
| D1 | 20.45 mm |
| r1,2 - min. | 0.3 mm |
| r3,4 - min. | 0.3 mm |
| a | 8.3 mm |
| da - min. | 12 mm |
| db - min. | 12 mm |
| Da - max. | 24 mm |
| Db - max. | 23.6 mm |
| ra - max. | 0.3 mm |
| rb - max. | 0.3 mm |
| dn | 16.5 mm |
| Basic dynamic load rating - C | 2.9 kN |
| Basic static load rating - C0 | 1.1 kN |
| Fatigue load limit - Pu | 0.048 kN |
| Limiting speed for grease lubrication | 83000 r/min |
| Limiting speed for oil lubrication | 127000 mm/min |
| Ball - Dw | 3.969 mm |
| Ball - z | 11 |
| Gref | 0.28 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 26 N |
| Preload class B - GB | 80 N |
| Preload class C - GC | 160 N |
| Calculation factor - f | 1.03 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.03 |
| Calculation factor - f2C | 1.06 |
| Calculation factor - fHC | 1 |
| Preload class A | 31 N/micron |
| Preload class B | 47 N/micron |
| Preload class C | 61 N/micron |
| r1,2 min. | 0.3 mm |
| r3,4 min. | 0.3 mm |
| da min. | 12 mm |
| db min. | 12 mm |
| Da max. | 24 mm |
| Db max. | 23.6 mm |
| ra max. | 0.3 mm |
| rb max. | 0.3 mm |
| Basic dynamic load rating C | 2.86 kN |
| Basic static load rating C0 | 1.14 kN |
| Fatigue load limit Pu | 0.048 kN |
| Attainable speed for grease lubrication | 83000 r/min |
| Attainable speed for oil-air lubrication | 127000 r/min |
| Ball diameter Dw | 3.969 mm |
| Number of balls z | 11 |
| Reference grease quantity Gref | 0.28 cm³ |
| Preload class A GA | 26 N |
| Static axial stiffness, preload class A | 31 N/µm |
| Preload class B GB | 80 N |
| Static axial stiffness, preload class B | 47 N/µm |
| Preload class C GC | 160 N |
| Static axial stiffness, preload class C | 61 N/µm |
| Calculation factor f | 1.03 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.03 |
| Calculation factor f2C | 1.06 |
| Calculation factor fHC | 1 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.019 kg |
Company Profile
| Worktime |
7:00AM - 6:00PM |
| Phone |
0065 82577418 |
| Fax |
0065 82577552 |
