SKF SY 35 TR Y-bearing plummer block units
With Pioneer Machinery Source over 10170 full-service stores, our SKF SY 35 TR Y-bearing plummer block units inventory is 46.038 mm da extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
| da: | 46.038 mm |
| Da: | 100 mm |
| Ca: | 30.785 mm |
| A1: | 69.85 mm |
| A2: | 171.45 mm |
| S: | 3.175 mm |
| ba: | 26.988 mm |
| H: | 133.35 mm |
Product Details
| da | 46.038 mm |
| Da | 100 mm |
| Ca | 30.785 mm |
| A1 | 69.85 mm |
| A2 | 171.45 mm |
| S | 3.175 mm |
| ba | 26.988 mm |
| H | 133.35 mm |
| H1 | 69.85 mm |
| H2 | 23.813 mm |
| J min. | 187.325 mm |
| J max. | 209.55 mm |
| L | 244.475 mm |
| N1 | 19.05 mm |
| R1 | 34.131 mm |
| R2 | 15.875 mm |
| RG | 1/8 NPT |
| PG | 1/8 NPT |
| h | 30.163 mm |
| Housing | SAF 511 |
| Stabilizing ring | SR-11-0 |
| Taconite seal | TER 22 |
| End plug (suffix Y) | EPR 5 |
| Max. speed for Taconite seal | 1575 r/min |
| P60° | 44.9 kN |
| P90° | 27.1 kN |
| P120° | 17.3 kN |
| P150° | 15.6 kN |
| P180° | 19.1 kN |
| Pa | 4.14 kN |
| Mass pillow block | 7.85 kg |
| Cap bolt | 2 x 1/2-13 UNC |
| Cap bolt recommended tightening torque | 81.3 N·m |
| Cap bolt, SAE grade | 5 |
| Appropriate attachment bolt size G | 0.625 in |
| Initial grease fill | 39.69 g |
Company Profile
| Worktime |
7:00AM - 6:00PM |
| Phone |
0065 82577418 |
| Fax |
0065 82577552 |
SKF SSAFS 22517 x 2.13/16 SAF and SAW pillow blocks with bearings on an adapter sleeve
SKF SSAFS 22517 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve
SKF SSAFS 22516 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve
SKF SSAFS 22517 T SAF and SAW pillow blocks with bearings on an adapter sleeve
SKF SSAFS 22516 T SAF and SAW pillow blocks with bearings on an adapter sleeve
SKF SSAFS 22517 SAF and SAW pillow blocks with bearings on an adapter sleeve