| ROLLING BEARINGS FOR STEEL MILLS 420KV6501 | Accessories:Shield & Seal; Grease Speed Rating Open/Shielded n1:12000 rpm; Basic Static Radial Load Rating Co:7800 N; Oil Speed Rating Open/Shielded n2:15000 rpm; B:15.00 mm; Sealed Speed Rating n3:8500 rpm; d:25.000 mm; Fillet Radius ra:1.00 mm; D:52.0000 mm; Oil Speed Rating n2:15000 rpm; |
| ROLLING BEARINGS FOR STEEL MILLS 390KV5101 | Static axial stiffness, preload class B:105 N/µm; Calculation factor (single, tandem) Y2:0.87; ra max.:0.6 mm; Calculation factor f2A:1; Calculation factor f2D:1.14; da min.:38.2 mm; Static axial stiffness, preload class D:183 N/µm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor fHC:1; d2:41.6 mm; |
| ROLLING BEARINGS FOR STEEL MILLS EE220975D-1575-1576D | ba:90.487 mm; Adapter sleeve assembly:SNW 44x7.1/2; Cap bolt, SAE grade:8; RG:1 NPT; PG:1/4 NPT; Eye bolt:2 x 1/2-13 UNC; R1:130.175 mm; L:831.85 mm; Appropriate attachment bolt size G:1.5 in; Mass pillow block:262 kg; |
| ROLLING BEARINGS FOR STEEL MILLS EE665231D-355-356D | Labyrinth ring (db shaft position):LOR 171; Appropriate attachment bolt size G:1.25 in; A2:273.05 mm; PosiTrac Plus contact element (dc shaft position):B10724-159; Stabilizing ring:SR-38-32; ba:78.581 mm; P150°:94.3 kN; Ca:101.803 mm; End plug (suffix Y):EPR 21; Da:339.999 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 400KV81 | Static (Cor):8.3 mm; D:225 mm; rs (min):2.1 mm; with cylindrical bore:1 700 min-1; B:56 mm; d:150 mm; Oil:88.970 kN; Pu:573 kN; with tapered bore:2 200 min-1; Dynamic (Cr):4.5 mm; |
| ROLLING BEARINGS FOR STEEL MILLS EE843220DW-290-291D | Grease Speed Rating n1:2500 rpm; B:40.00 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3000 rpm; Basic Dynamic Radial Load Rating C:183000 N; d:160.000 mm; D:250.0000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:228000 N; |
| ROLLING BEARINGS FOR STEEL MILLS M270749DW-710-710D | Static axial stiffness, preload class B:105 N/µm; Calculation factor (single, tandem) Y2:0.87; ra max.:0.6 mm; Calculation factor f2A:1; Calculation factor f2D:1.14; da min.:38.2 mm; Static axial stiffness, preload class D:183 N/µm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor fHC:1; d2:41.6 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 48290D-220-220D | P120°:2500 kN; da:341.313 mm; Appropriate attachment bolt, size G:36 mm; Q150°:1650 kN; Adapter sleeve:H 3072/13.7/16; J:750 mm; P55°:7000 kN; Bearing (basic designation):C 3072 K; N4 max.:25 mm; A2:365 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 288KV4051 | P120°:2500 kN; da:341.313 mm; Appropriate attachment bolt, size G:36 mm; Q150°:1650 kN; Adapter sleeve:H 3072/13.7/16; J:750 mm; P55°:7000 kN; Bearing (basic designation):C 3072 K; N4 max.:25 mm; A2:365 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 585KV7752 | Hydraulic nut:HMV 100 E; G:Tr 500x5; G2:G 1/4; Nut for removal:HM 30/500; d:480 mm; A:9 mm; G1:38 mm; Mass withdrawal sleeve:34 kg; B1:205 mm; d1:460 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 170KV895 | Static (Cor):8.3 mm; D:225 mm; rs (min):2.1 mm; with cylindrical bore:1 700 min-1; B:56 mm; d:150 mm; Oil:88.970 kN; Pu:573 kN; with tapered bore:2 200 min-1; Dynamic (Cr):4.5 mm; |
| ROLLING BEARINGS FOR STEEL MILLS EE328172D-269-268D | d1:110 mm; B1:72 mm; d:120 mm; d3:155 mm; B:26 mm; Lock nut:KMFE 24; Hydraulic nut:HMV 24 E; G:M 120x2; Mass adapter sleeve assembly:1.85 kg; |
| ROLLING BEARINGS FOR STEEL MILLS 460KV6101 | Insert Bearing IB:Stainless Steel; Width A:1.4375 in; Dimension H1:1.4375 in; Thread Diameter G:3/8-16; Basic Dynamic Radial Load Rating:2520 lbf; Height H:2.9375 in; Distance J:2.0000 in; Shaft Diameter D:1 in; Basic Static Radial Load Rating Co:1750 lbf; Dimension L:3.2500 in; |
| ROLLING BEARINGS FOR STEEL MILLS 611KV8351 | ba:90.487 mm; Adapter sleeve assembly:SNW 44x7.1/2; Cap bolt, SAE grade:8; RG:1 NPT; PG:1/4 NPT; Eye bolt:2 x 1/2-13 UNC; R1:130.175 mm; L:831.85 mm; Appropriate attachment bolt size G:1.5 in; Mass pillow block:262 kg; |