| ROLLING BEARINGS FOR STEEL MILLS 500KV895 | Accessories:Shield & Seal; Grease Speed Rating Open/Shielded n1:12000 rpm; Basic Static Radial Load Rating Co:7800 N; Oil Speed Rating Open/Shielded n2:15000 rpm; B:15.00 mm; Sealed Speed Rating n3:8500 rpm; d:25.000 mm; Fillet Radius ra:1.00 mm; D:52.0000 mm; Oil Speed Rating n2:15000 rpm; |
| ROLLING BEARINGS FOR STEEL MILLS EE529091D-157-158XD | Accessories:Shield & Seal; Grease Speed Rating Open/Shielded n1:12000 rpm; Basic Static Radial Load Rating Co:7800 N; Oil Speed Rating Open/Shielded n2:15000 rpm; B:15.00 mm; Sealed Speed Rating n3:8500 rpm; d:25.000 mm; Fillet Radius ra:1.00 mm; D:52.0000 mm; Oil Speed Rating n2:15000 rpm; |
| ROLLING BEARINGS FOR STEEL MILLS 140KV895 | Basic Static Radial Load Rating Co:490000 N; Basic Dynamic Radial Load Rating C:345000 N; Oil Speed Rating n2:2200 rpm; Fillet Radius ra:2.00 mm; D:260.0000 mm; d:170.000 mm; Grease Speed Rating n1:1800 rpm; Fillet Radius rb:1.00 mm; B:84.00 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 400KV81 | Static (Cor):8.3 mm; D:225 mm; rs (min):2.1 mm; with cylindrical bore:1 700 min-1; B:56 mm; d:150 mm; Oil:88.970 kN; Pu:573 kN; with tapered bore:2 200 min-1; Dynamic (Cr):4.5 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 355KV4853 | ba:90.487 mm; Adapter sleeve assembly:SNW 44x7.1/2; Cap bolt, SAE grade:8; RG:1 NPT; PG:1/4 NPT; Eye bolt:2 x 1/2-13 UNC; R1:130.175 mm; L:831.85 mm; Appropriate attachment bolt size G:1.5 in; Mass pillow block:262 kg; |
| ROLLING BEARINGS FOR STEEL MILLS 430KV5701 | Grease Speed Rating n1:2500 rpm; B:40.00 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3000 rpm; Basic Dynamic Radial Load Rating C:183000 N; d:160.000 mm; D:250.0000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:228000 N; |
| ROLLING BEARINGS FOR STEEL MILLS 220KV89 | B1:156.997 mm; B5:47.092 mm; Sleeve:S 3056x10.1/2; Locking plate:PL 56; d3 max.:330.327 mm; d:280 mm; Threads per inch:6; Hydraulic nut:HMVC 56E; Lock nut:N 056; B:38.354 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 685KV8751 | d1:110 mm; B1:72 mm; d:120 mm; d3:155 mm; B:26 mm; Lock nut:KMFE 24; Hydraulic nut:HMV 24 E; G:M 120x2; Mass adapter sleeve assembly:1.85 kg; |
| ROLLING BEARINGS FOR STEEL MILLS 343KV4555 | Insert Bearing IB:Stainless Steel; Width A:1.4375 in; Dimension H1:1.4375 in; Thread Diameter G:3/8-16; Basic Dynamic Radial Load Rating:2520 lbf; Height H:2.9375 in; Distance J:2.0000 in; Shaft Diameter D:1 in; Basic Static Radial Load Rating Co:1750 lbf; Dimension L:3.2500 in; |
| ROLLING BEARINGS FOR STEEL MILLS 982025D-900-901D | Labyrinth ring (db shaft position):LOR 171; Appropriate attachment bolt size G:1.25 in; A2:273.05 mm; PosiTrac Plus contact element (dc shaft position):B10724-159; Stabilizing ring:SR-38-32; ba:78.581 mm; P150°:94.3 kN; Ca:101.803 mm; End plug (suffix Y):EPR 21; Da:339.999 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 635KV895 | Static axial stiffness, preload class B:105 N/µm; Calculation factor (single, tandem) Y2:0.87; ra max.:0.6 mm; Calculation factor f2A:1; Calculation factor f2D:1.14; da min.:38.2 mm; Static axial stiffness, preload class D:183 N/µm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor fHC:1; d2:41.6 mm; |
| ROLLING BEARINGS FOR STEEL MILLS EE275106D-155-156D | Specific static load factor K0:45 N/mm²; h:76.5 mm; Coefficient of friction µ max.:0.15; Permissible sliding velocity v max.:0.5 m/s; Permissible sliding velocity v min.:0 m/s; Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; Tolerance housing:H7; d:75 mm; Mass bushing:2.4 kg; |
| ROLLING BEARINGS FOR STEEL MILLS M281649D-610-610D | Hydraulic nut:HMV 100 E; G:Tr 500x5; G2:G 1/4; Nut for removal:HM 30/500; d:480 mm; A:9 mm; G1:38 mm; Mass withdrawal sleeve:34 kg; B1:205 mm; d1:460 mm; |
| ROLLING BEARINGS FOR STEEL MILLS LM282847DW-810-810D | ba:90.487 mm; Adapter sleeve assembly:SNW 44x7.1/2; Cap bolt, SAE grade:8; RG:1 NPT; PG:1/4 NPT; Eye bolt:2 x 1/2-13 UNC; R1:130.175 mm; L:831.85 mm; Appropriate attachment bolt size G:1.5 in; Mass pillow block:262 kg; |