| ROLLING BEARINGS FOR STEEL MILLS 140KV81 | Fillet Radius ra:2.00 mm; d:55.000 mm; Sealed Speed Rating n3:3800 rpm; D:120.0000 mm; B:52.40 mm; Oil Speed Rating n2:5000 rpm; Basic Dynamic Radial Load Rating C:119000 N; Accessories:Two Shields; Grease Speed Rating n1:3800 rpm; Basic Static Radial Load Rating Co:122000 N; |
| ROLLING BEARINGS FOR STEEL MILLS 304KV4353 | ba:90.487 mm; Adapter sleeve assembly:SNW 44x7.1/2; Cap bolt, SAE grade:8; RG:1 NPT; PG:1/4 NPT; Eye bolt:2 x 1/2-13 UNC; R1:130.175 mm; L:831.85 mm; Appropriate attachment bolt size G:1.5 in; Mass pillow block:262 kg; |
| ROLLING BEARINGS FOR STEEL MILLS EE127097D-135-136D | P120°:2500 kN; da:341.313 mm; Appropriate attachment bolt, size G:36 mm; Q150°:1650 kN; Adapter sleeve:H 3072/13.7/16; J:750 mm; P55°:7000 kN; Bearing (basic designation):C 3072 K; N4 max.:25 mm; A2:365 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 431KV6351 | d1:110 mm; B1:72 mm; d:120 mm; d3:155 mm; B:26 mm; Lock nut:KMFE 24; Hydraulic nut:HMV 24 E; G:M 120x2; Mass adapter sleeve assembly:1.85 kg; |
| ROLLING BEARINGS FOR STEEL MILLS 711KV9151 | Specific static load factor K0:45 N/mm²; h:76.5 mm; Coefficient of friction µ max.:0.15; Permissible sliding velocity v max.:0.5 m/s; Permissible sliding velocity v min.:0 m/s; Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; Tolerance housing:H7; d:75 mm; Mass bushing:2.4 kg; |
| ROLLING BEARINGS FOR STEEL MILLS HM259049D-010-010D | Hydraulic nut:HMV 100 E; G:Tr 500x5; G2:G 1/4; Nut for removal:HM 30/500; d:480 mm; A:9 mm; G1:38 mm; Mass withdrawal sleeve:34 kg; B1:205 mm; d1:460 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 160KV81 | Static axial stiffness, preload class B:105 N/µm; Calculation factor (single, tandem) Y2:0.87; ra max.:0.6 mm; Calculation factor f2A:1; Calculation factor f2D:1.14; da min.:38.2 mm; Static axial stiffness, preload class D:183 N/µm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor fHC:1; d2:41.6 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 105KV1501 | ba:90.487 mm; Adapter sleeve assembly:SNW 44x7.1/2; Cap bolt, SAE grade:8; RG:1 NPT; PG:1/4 NPT; Eye bolt:2 x 1/2-13 UNC; R1:130.175 mm; L:831.85 mm; Appropriate attachment bolt size G:1.5 in; Mass pillow block:262 kg; |
| ROLLING BEARINGS FOR STEEL MILLS LM282847DW-810-810D | ba:90.487 mm; Adapter sleeve assembly:SNW 44x7.1/2; Cap bolt, SAE grade:8; RG:1 NPT; PG:1/4 NPT; Eye bolt:2 x 1/2-13 UNC; R1:130.175 mm; L:831.85 mm; Appropriate attachment bolt size G:1.5 in; Mass pillow block:262 kg; |
| ROLLING BEARINGS FOR STEEL MILLS 680KV8751 | Accessories:One Shield & Snap-Ri; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2800 rpm; d:70.000 mm; Basic Static Radial Load Rating Co:186000 N; Basic Dynamic Radial Load Rating C:172000 N; Oil Speed Rating n2:3800 rpm; B:66.70 mm; Sealed Speed Rating n3:2800 rpm; D:150.0000 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 500KV89 | Labyrinth ring (db shaft position):LOR 171; Appropriate attachment bolt size G:1.25 in; A2:273.05 mm; PosiTrac Plus contact element (dc shaft position):B10724-159; Stabilizing ring:SR-38-32; ba:78.581 mm; P150°:94.3 kN; Ca:101.803 mm; End plug (suffix Y):EPR 21; Da:339.999 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 400KV81 | Static (Cor):8.3 mm; D:225 mm; rs (min):2.1 mm; with cylindrical bore:1 700 min-1; B:56 mm; d:150 mm; Oil:88.970 kN; Pu:573 kN; with tapered bore:2 200 min-1; Dynamic (Cr):4.5 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 280KV3801 | Specific static load factor K0:45 N/mm²; h:76.5 mm; Coefficient of friction µ max.:0.15; Permissible sliding velocity v max.:0.5 m/s; Permissible sliding velocity v min.:0 m/s; Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; Tolerance housing:H7; d:75 mm; Mass bushing:2.4 kg; |
| ROLLING BEARINGS FOR STEEL MILLS LM263149D-110-110D | B1:156.997 mm; B5:47.092 mm; Sleeve:S 3056x10.1/2; Locking plate:PL 56; d3 max.:330.327 mm; d:280 mm; Threads per inch:6; Hydraulic nut:HMVC 56E; Lock nut:N 056; B:38.354 mm; |