| ROLLING BEARINGS FOR STEEL MILLS M262449DW-410-410D— | Static axial stiffness, preload class B:105 N/µm; Calculation factor (single, tandem) Y2:0.87; ra max.:0.6 mm; Calculation factor f2A:1; Calculation factor f2D:1.14; da min.:38.2 mm; Static axial stiffness, preload class D:183 N/µm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor fHC:1; d2:41.6 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 247KV4051 | Insert Bearing IB:Stainless Steel; Width A:1.4375 in; Dimension H1:1.4375 in; Thread Diameter G:3/8-16; Basic Dynamic Radial Load Rating:2520 lbf; Height H:2.9375 in; Distance J:2.0000 in; Shaft Diameter D:1 in; Basic Static Radial Load Rating Co:1750 lbf; Dimension L:3.2500 in; |
| ROLLING BEARINGS FOR STEEL MILLS 409KV5451 | Basic Static Radial Load Rating Co:490000 N; Basic Dynamic Radial Load Rating C:345000 N; Oil Speed Rating n2:2200 rpm; Fillet Radius ra:2.00 mm; D:260.0000 mm; d:170.000 mm; Grease Speed Rating n1:1800 rpm; Fillet Radius rb:1.00 mm; B:84.00 mm; |
| ROLLING BEARINGS FOR STEEL MILLS EE181455D-2350-2351D | Accessories:One Shield & Snap-Ri; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2800 rpm; d:70.000 mm; Basic Static Radial Load Rating Co:186000 N; Basic Dynamic Radial Load Rating C:172000 N; Oil Speed Rating n2:3800 rpm; B:66.70 mm; Sealed Speed Rating n3:2800 rpm; D:150.0000 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 110KV895 | Static (Cor):8.3 mm; D:225 mm; rs (min):2.1 mm; with cylindrical bore:1 700 min-1; B:56 mm; d:150 mm; Oil:88.970 kN; Pu:573 kN; with tapered bore:2 200 min-1; Dynamic (Cr):4.5 mm; |
| ROLLING BEARINGS FOR STEEL MILLS EE641198D-265-266D | d1:110 mm; B1:72 mm; d:120 mm; d3:155 mm; B:26 mm; Lock nut:KMFE 24; Hydraulic nut:HMV 24 E; G:M 120x2; Mass adapter sleeve assembly:1.85 kg; |
| ROLLING BEARINGS FOR STEEL MILLS LM767745D-710-710D | Specific static load factor K0:45 N/mm²; h:76.5 mm; Coefficient of friction µ max.:0.15; Permissible sliding velocity v max.:0.5 m/s; Permissible sliding velocity v min.:0 m/s; Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; Tolerance housing:H7; d:75 mm; Mass bushing:2.4 kg; |
| ROLLING BEARINGS FOR STEEL MILLS LM767749DW-710-710D | Static (Cor):8.3 mm; D:225 mm; rs (min):2.1 mm; with cylindrical bore:1 700 min-1; B:56 mm; d:150 mm; Oil:88.970 kN; Pu:573 kN; with tapered bore:2 200 min-1; Dynamic (Cr):4.5 mm; |
| ROLLING BEARINGS FOR STEEL MILLS LM282847DW-810-810D | Grease Speed Rating n1:2500 rpm; B:40.00 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3000 rpm; Basic Dynamic Radial Load Rating C:183000 N; d:160.000 mm; D:250.0000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:228000 N; |
| ROLLING BEARINGS FOR STEEL MILLS 360KV81 | Hydraulic nut:HMV 100 E; G:Tr 500x5; G2:G 1/4; Nut for removal:HM 30/500; d:480 mm; A:9 mm; G1:38 mm; Mass withdrawal sleeve:34 kg; B1:205 mm; d1:460 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 630KV81 | B1:156.997 mm; B5:47.092 mm; Sleeve:S 3056x10.1/2; Locking plate:PL 56; d3 max.:330.327 mm; d:280 mm; Threads per inch:6; Hydraulic nut:HMVC 56E; Lock nut:N 056; B:38.354 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 304KV4955 | Hydraulic nut:HMV 100 E; G:Tr 500x5; G2:G 1/4; Nut for removal:HM 30/500; d:480 mm; A:9 mm; G1:38 mm; Mass withdrawal sleeve:34 kg; B1:205 mm; d1:460 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 355KV4901 | P120°:2500 kN; da:341.313 mm; Appropriate attachment bolt, size G:36 mm; Q150°:1650 kN; Adapter sleeve:H 3072/13.7/16; J:750 mm; P55°:7000 kN; Bearing (basic designation):C 3072 K; N4 max.:25 mm; A2:365 mm; |
| ROLLING BEARINGS FOR STEEL MILLS 304KV4153 | d1:110 mm; B1:72 mm; d:120 mm; d3:155 mm; B:26 mm; Lock nut:KMFE 24; Hydraulic nut:HMV 24 E; G:M 120x2; Mass adapter sleeve assembly:1.85 kg; |