| sg Thrust cylindrical roller bearings 9222 | Fatigue load limit Pu:0.265 kN; Calculation factor e:0.68; D:62 mm; Number of balls z:17; db max.:41 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; db min.:39.6 mm; Preload class B GB:300 N; Static axial stiffness, preload class B:119 N/µm; Attainable speed for grease lubrication:31000 r/min; |
| sg Thrust cylindrical roller bearings 9549360 | Mass lock nut:316 kg; h:38 mm; Associated eyebolt for handling:M 20; b:70 mm; d3:1120 mm; Lock washer / Locking clip:MS 31/900; B5:154 mm; d1:1030 mm; d2:969 mm; G:Tr 900x7; |
| sg Thrust cylindrical roller bearings 81128 | Da max.:1056 mm; b:22.3 mm; d:670 mm; Calculation factor kr:0.32; ra max.:6 mm; Reference speed:430 r/min; s max.:19.5 mm; da min.:704 mm; Limiting speed:530 r/min; Design variant/feature:NNU K30/W33; |
| sg Thrust cylindrical roller bearings 89428 | H2:31.75 mm; Cap bolt, SAE grade:5; H1:88.9 mm; N1:19.05 mm; S:4.763 mm; P150°:19.6 kN; J min.:244.475 mm; Initial grease fill:87.885 g; Taconite seal (dc shaft position):TER 54; Max. speed for Taconite seal:850 r/min; |
| sg Thrust cylindrical roller bearings 9226 | J min.:549.275 mm; Labyrinth ring:2 x LOR 156; Housing:SAF 538; Bearing limiting speed:2400 r/min; H1:200.025 mm; da:177.8 mm; N1:34.925 mm; P180°:113 kN; ba:78.581 mm; P150°:94.3 kN; |
| sg Thrust cylindrical roller bearings 89424 | Calculation factor Y0:0.9; Da min.:148 mm; Dimension series:2GB; rb max.:2.5 mm; T:42.5 mm; d:80 mm; Fatigue load limit Pu:36.5 kN; Mass bearing:4.13 kg; Db min.:159 mm; Ca min.:5 mm; |
| sg Thrust cylindrical roller bearings 89480 | Calculation factor Y0:0.9; Da min.:148 mm; Dimension series:2GB; rb max.:2.5 mm; T:42.5 mm; d:80 mm; Fatigue load limit Pu:36.5 kN; Mass bearing:4.13 kg; Db min.:159 mm; Ca min.:5 mm; |
| sg Thrust cylindrical roller bearings 89368 | Recommended diameter for attachment bolts, inch G:0.375 in; Thread grub screw G2:M6x0.75; Recommended diameter for attachment bolts, mm G:10 mm; Housing:SYK 504; Basic static load rating C0:6.55 kN; A5:18.5 mm; Hexagonal key size for grub screw N:3 mm; Recommended tightening torque for grub screw:4 N·m; H:64.5 mm; A:32 mm; |
| sg Thrust cylindrical roller bearings 92/630 | P90°:140 kN; da:127 mm; J min.:492.125 mm; Appropriate attachment bolt size G:1 in; P120°:85.9 kN; Eye bolt:2 x 3/8-16 UNC; ba:78.581 mm; Mass pillow block:134 kg; h:65.088 mm; J1:107.95 mm; |
| sg Thrust cylindrical roller bearings 812/850 | Basic Static Radial Load Rating Co:108000 N; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:3600 rpm; Fillet Radius ra:2.00 mm; B:33.00 mm; D:210.0000 mm; Sealed Speed Rating n3:1800 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; d:140.000 mm; Basic Dynamic Radial Load Rating C:111000 N; |
| sg Thrust cylindrical roller bearings 89332 | Calculation factor Y0:0.9; Da min.:148 mm; Dimension series:2GB; rb max.:2.5 mm; T:42.5 mm; d:80 mm; Fatigue load limit Pu:36.5 kN; Mass bearing:4.13 kg; Db min.:159 mm; Ca min.:5 mm; |
| sg Thrust cylindrical roller bearings 92/560 | J min.:549.275 mm; Labyrinth ring:2 x LOR 156; Housing:SAF 538; Bearing limiting speed:2400 r/min; H1:200.025 mm; da:177.8 mm; N1:34.925 mm; P180°:113 kN; ba:78.581 mm; P150°:94.3 kN; |
| sg Thrust cylindrical roller bearings 812/560 | J min.:549.275 mm; Labyrinth ring:2 x LOR 156; Housing:SAF 538; Bearing limiting speed:2400 r/min; H1:200.025 mm; da:177.8 mm; N1:34.925 mm; P180°:113 kN; ba:78.581 mm; P150°:94.3 kN; |
| sg Thrust cylindrical roller bearings 7549434 | Basic Static Radial Load Rating Co:108000 N; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:3600 rpm; Fillet Radius ra:2.00 mm; B:33.00 mm; D:210.0000 mm; Sealed Speed Rating n3:1800 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; d:140.000 mm; Basic Dynamic Radial Load Rating C:111000 N; |
Thrust Cylindrical Roller Bearing by NTN (K81111T2
Thrust Cylindrical Roller Bearing by NTN (K81111T2) - Select, configure, order. MISUMI delivers punctually and offers fair prices. More than 14 million products
Cylindrical Roller Thrust Bearing Catalogue - NBC Bearing
Thrust bearings incorporating cylindrical rollers are available in single row, double row Cylindrical roller thrust bearings are able to receive axial loads only, and
Cylindrical roller thrust bearings | SKF
SKF cylindrical roller thrust bearings are designed to accommodate heavy axial loads and impact loads. They must not be subjected to any radial load
Needle Roller Bearings Thrust cylindrical roller ... - NTN Global
Bearing numbers. Reference. Abutment. Mass dimensions dimensions mm mm kg bearing thrust cylindrical roller inner ring outer ring da. Db ras and cage
Thrust cylindrical roller bearings, single row | SLF Fraureuth
Thrust cylindrical roller bearings are rigid and stable impact-resistant bearings. The bearings accept very high forces in axial direction; however, no radial forces
Thrust Roller Bearings | Roller Bearings | Products | NSK Global
Available with cylindrical or spherical rollers, NSK's thrust roller bearings sustain only axial loads, but they are suitable for heavy loads and have high axial
Thrust bearing - Wikipedia
Cylindrical thrust roller bearings consist of small cylindrical rollers arranged flat with their axes pointing to the axis of the bearing. They give very good carrying
Cylindrical Roller Thrust Bearings - AEC
Cylindrical roller thrust bearings are designed to to carry axial loads with no radial load carrying capacity. They comprise of a shaft washer, a housing washer, and
Thrust Bearings | The Timken Company
Cylindrical Roller. Cylindrical roller thrust bearings are suitable for heavy loads at moderate speeds with multiple roller-per-pocket options for increase load