| Single row tapered roller bearings 32088 | Ca:37.008 mm; S:3.175 mm; RG:1/4 NPT; PG:1/8 NPT; R2:21.431 mm; da:63.5 mm; H2:28.575 mm; Stabilizing ring:SR-15-0; Adapter sleeve assembly:SNW 15x2.1/2; Labyrinth ring:2 x LOR 38; |
| Single row tapered roller bearings 32936 | a:60.556 mm; Reference speed:1600 r/min; d1 ≈:246.4 mm; T:46.038 mm; Basic static load rating C0:830 kN; Da min.:254 mm; Calculation factor e:0.5; D:279.4 mm; Mass bearing:8.98 kg; db min.:216.5 mm; |
| Single row tapered roller bearings 30220 | Basic Static Radial Load Rating Co:153000 N; Oil Speed Rating Open/Shielded n2:3400 rpm; Accessories:Two Shields & Snap-R; D:225.0000 mm; Oil Speed Rating n2:3400 rpm; d:105.000 mm; B:49.00 mm; Grease Speed Rating n1:2800 rpm; Sealed Speed Rating n3:2000 rpm; Basic Dynamic Radial Load Rating C:182000 N; |
| Single row tapered roller bearings 30326 | K:6 mm; r5 min.:0.6 mm; rc max.:0.6 mm; Basic dynamic load rating C:432 kN; Fatigue load limit Pu:80 kN; 2B:64 mm; Da min.:177 mm; Ca min.:6 mm; Calculation factor Y1:1.9; Mass bearing pair:5.22 kg; |
| Single row tapered roller bearings 32940 | d:100 mm; rs (min):2.1 mm; Oil:58.650 kN; D:180 mm; Dynamic (Cr):4.5 mm; Pu:390 kN; with cylindrical bore:1 700 min-1; Static (Cor):8.3 mm; Grease:532 kN; with tapered bore:2 000 min-1; |
| Single row tapered roller bearings 30321 | Basic Static Radial Load Rating Co:153000 N; Oil Speed Rating Open/Shielded n2:3400 rpm; Accessories:Two Shields & Snap-R; D:225.0000 mm; Oil Speed Rating n2:3400 rpm; d:105.000 mm; B:49.00 mm; Grease Speed Rating n1:2800 rpm; Sealed Speed Rating n3:2000 rpm; Basic Dynamic Radial Load Rating C:182000 N; |
| Single row tapered roller bearings 33030 | K:6 mm; r5 min.:0.6 mm; rc max.:0.6 mm; Basic dynamic load rating C:432 kN; Fatigue load limit Pu:80 kN; 2B:64 mm; Da min.:177 mm; Ca min.:6 mm; Calculation factor Y1:1.9; Mass bearing pair:5.22 kg; |
| Single row tapered roller bearings 32264 | Ca:37.008 mm; S:3.175 mm; RG:1/4 NPT; PG:1/8 NPT; R2:21.431 mm; da:63.5 mm; H2:28.575 mm; Stabilizing ring:SR-15-0; Adapter sleeve assembly:SNW 15x2.1/2; Labyrinth ring:2 x LOR 38; |
| Single row tapered roller bearings 32928X3 | H2:69.85 mm; S:4.763 mm; Ca:119.812 mm; Eye bolt:2 x 3/8-16 UNC; P60°:234 kN; Da:309.999 mm; Housing:SAW 534; A1:171.45 mm; RG:3/4 NPT; J min.:492.125 mm; |
| Single row tapered roller bearings 30348 | a:60.556 mm; Reference speed:1600 r/min; d1 ≈:246.4 mm; T:46.038 mm; Basic static load rating C0:830 kN; Da min.:254 mm; Calculation factor e:0.5; D:279.4 mm; Mass bearing:8.98 kg; db min.:216.5 mm; |
| Single row tapered roller bearings 32221 | Mass pillow block:30.8 kg; P90°:84.5 kN; N1:23.813 mm; End plug (suffix Y):EPR 11; P180°:58.7 kN; h:38.1 mm; P120°:53.4 kN; J min.:263.525 mm; RG:3/8 NPT; ba:40.481 mm; |
| Single row tapered roller bearings 32036X | d:220 mm; Hydraulic nut:HMVC 44E; Mass adapter sleeve assembly:14.5 kg; B1:149.631 mm; d1:198.438 mm; B4:35.712 mm; d3 max.:279.527 mm; Threads per inch:8; Sleeve:S 44x7.13/16; Lock nut:N 44; |
| Single row tapered roller bearings 30228 | d:220 mm; Hydraulic nut:HMVC 44E; Mass adapter sleeve assembly:14.5 kg; B1:149.631 mm; d1:198.438 mm; B4:35.712 mm; d3 max.:279.527 mm; Threads per inch:8; Sleeve:S 44x7.13/16; Lock nut:N 44; |
| Single row tapered roller bearings 32034X | Mass pillow block:30.8 kg; P90°:84.5 kN; N1:23.813 mm; End plug (suffix Y):EPR 11; P180°:58.7 kN; h:38.1 mm; P120°:53.4 kN; J min.:263.525 mm; RG:3/8 NPT; ba:40.481 mm; |
Tapered Roller Bearings | Fersa Bearings
Tapered roller bearings in metric and inch series. Flange side bearings. Single and double row. Thrust and steering bearings and U series. Fersa part numbers
Tapered roller bearings by FAG | Schaeffler Germany
FAG tapered roller bearings can support high radial and axial loads with X-Life Quality ➤ Inform now. ... Single-row tapered roller bearings. Single-row tapered
Tapered Roller Bearings | Roller Bearings | Products | NSK
Bearings of this type use conical rollers guided by a back-face rib on the cone. ... Double-row and four-row tapered roller bearings are also available. Pressed
352219 Double Row Tapered Roller Bearing 95x170x100mm
352219 Taper Roller Wheel Bearing95mmx170mmx100mmOne Bearing 352219 Taper Roller Wheel Bearing, it is able to carry radial and axial load in one
Tapered Roller Bearings | The Timken Company
Inch Single Row. Single-row tapered roller bearings are the most basic and widely used, consisting of a cone assembly and a cup. Timken patented the first in
Single row tapered roller bearings
This provides optimal load distribution, reduces noise and vibration, and enables preload to be set more accurately. A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved
Single Row Tapered Roller Bearings | Single Row TRB - NBC
The correct amount of radial and axial clearance is obtained by adjusting the two bearings against each other. Besides, double row and four row taper roller bearings are also widely used for heavy loads such as rolling mills. A single row taper roller bearing can be located endwise in one direction only
SKF Single row tapered roller bearing metric | ERIKS shop NL
The projection lines of the raceways meet at a common point on the bearing axis to provide true rolling and low friction. Single row tapered roller bearings are
Double row tapered roller bearings
SKF manufactures double row tapered roller bearings in the TDO (fig. 1) and TDI (fig. 2) designs, in many variants and with different features (→ Designs and