Single row tapered roller bearings 32248

Single row tapered roller bearings 32936	a:60.556 mm; Reference speed:1600 r/min; d1 ≈:246.4 mm; T:46.038 mm; Basic static load rating C0:830 kN; Da min.:254 mm; Calculation factor e:0.5; D:279.4 mm; Mass bearing:8.98 kg; db min.:216.5 mm;
Single row tapered roller bearings 31328	Mass pillow block:30.8 kg; P90°:84.5 kN; N1:23.813 mm; End plug (suffix Y):EPR 11; P180°:58.7 kN; h:38.1 mm; P120°:53.4 kN; J min.:263.525 mm; RG:3/8 NPT; ba:40.481 mm;
Single row tapered roller bearings 32976	Calculation factor f1:1; Calculation factor f2A:1; B:20 mm; Mass bearing:0.61 kg; Basic dynamic load rating C:23.8 kN; Static axial stiffness, preload class B:88 N/µm; d1:84.3 mm; Static axial stiffness, preload class A:57 N/µm; Fatigue load limit Pu:0.78 kN; da min.:76 mm;
Single row tapered roller bearings 32236	Calculation factor f1:1; Calculation factor f2A:1; B:20 mm; Mass bearing:0.61 kg; Basic dynamic load rating C:23.8 kN; Static axial stiffness, preload class B:88 N/µm; d1:84.3 mm; Static axial stiffness, preload class A:57 N/µm; Fatigue load limit Pu:0.78 kN; da min.:76 mm;
Single row tapered roller bearings 32240	Specific dynamic load factor K:10 N/mm²; B:15 mm; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ min.:0.05; Tolerance housing:H7; Tolerance shaft:h8; D:20 mm; Permissible sliding velocity v max.:5 m/s; d:15 mm; Coefficient of friction µ max.:0.1;
Single row tapered roller bearings 32032X	H2:69.85 mm; S:4.763 mm; Ca:119.812 mm; Eye bolt:2 x 3/8-16 UNC; P60°:234 kN; Da:309.999 mm; Housing:SAW 534; A1:171.45 mm; RG:3/4 NPT; J min.:492.125 mm;
Single row tapered roller bearings 32224	a:60.556 mm; Reference speed:1600 r/min; d1 ≈:246.4 mm; T:46.038 mm; Basic static load rating C0:830 kN; Da min.:254 mm; Calculation factor e:0.5; D:279.4 mm; Mass bearing:8.98 kg; db min.:216.5 mm;
Single row tapered roller bearings 32940	d:100 mm; rs (min):2.1 mm; Oil:58.650 kN; D:180 mm; Dynamic (Cr):4.5 mm; Pu:390 kN; with cylindrical bore:1 700 min-1; Static (Cor):8.3 mm; Grease:532 kN; with tapered bore:2 000 min-1;
Single row tapered roller bearings 32230	B:60.00 mm; Basic Static Radial Load Rating Co:216000 N; D:160.0000 mm; d:90.000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:203000 N; Oil Speed Rating n2:5400 rpm; Grease Speed Rating n1:3800 rpm; Fillet Radius rb:1.00 mm;
Single row tapered roller bearings 32922	K:6 mm; r5 min.:0.6 mm; rc max.:0.6 mm; Basic dynamic load rating C:432 kN; Fatigue load limit Pu:80 kN; 2B:64 mm; Da min.:177 mm; Ca min.:6 mm; Calculation factor Y1:1.9; Mass bearing pair:5.22 kg;
Single row tapered roller bearings 33022	a:60.556 mm; Reference speed:1600 r/min; d1 ≈:246.4 mm; T:46.038 mm; Basic static load rating C0:830 kN; Da min.:254 mm; Calculation factor e:0.5; D:279.4 mm; Mass bearing:8.98 kg; db min.:216.5 mm;
Single row tapered roller bearings 32232	Calculation factor f1:1; Calculation factor f2A:1; B:20 mm; Mass bearing:0.61 kg; Basic dynamic load rating C:23.8 kN; Static axial stiffness, preload class B:88 N/µm; d1:84.3 mm; Static axial stiffness, preload class A:57 N/µm; Fatigue load limit Pu:0.78 kN; da min.:76 mm;
Single row tapered roller bearings 32328	Mass pillow block:30.8 kg; P90°:84.5 kN; N1:23.813 mm; End plug (suffix Y):EPR 11; P180°:58.7 kN; h:38.1 mm; P120°:53.4 kN; J min.:263.525 mm; RG:3/8 NPT; ba:40.481 mm;
Single row tapered roller bearings 32968	d1 ≈:171 mm; da max.:151 mm; s max.:4.8 mm; Reference speed:2600 r/min; Calculation factor kr:0.15; F:155 mm; r3,4 min.:4 mm; da min.:131 mm; Angle ring:HJ 422; D:280 mm;

Tapered Roller Bearings | Fersa Bearings

Tapered roller bearings in metric and inch series. Flange side bearings. Single and double row. Thrust and steering bearings and U series. Fersa part numbers

Tapered roller bearings by FAG | Schaeffler Germany

FAG tapered roller bearings can support high radial and axial loads with X-Life Quality ➤ Inform now. ... Single-row tapered roller bearings. Single-row tapered

Tapered Roller Bearings | The Timken Company

Inch Single Row. Single-row tapered roller bearings are the most basic and widely used, consisting of a cone assembly and a cup. Timken patented the first in

SKF Single row tapered roller bearing metric | ERIKS shop NL

The projection lines of the raceways meet at a common point on the bearing axis to provide true rolling and low friction. Single row tapered roller bearings are

352219 Double Row Tapered Roller Bearing 95x170x100mm

352219 Taper Roller Wheel Bearing95mmx170mmx100mmOne Bearing 352219 Taper Roller Wheel Bearing, it is able to carry radial and axial load in one

Single Row Tapered Roller Bearings | Single Row TRB - NBC

The correct amount of radial and axial clearance is obtained by adjusting the two bearings against each other. Besides, double row and four row taper roller bearings are also widely used for heavy loads such as rolling mills. A single row taper roller bearing can be located endwise in one direction only

Tapered Roller Bearings | Roller Bearings | Products | NSK

Bearings of this type use conical rollers guided by a back-face rib on the cone. ... Double-row and four-row tapered roller bearings are also available. Pressed

Double row tapered roller bearings

SKF manufactures double row tapered roller bearings in the TDO (fig. 1) and TDI (fig. 2) designs, in many variants and with different features (→ Designs and