| Single row tapered roller bearings 32084 | d:100 mm; rs (min):2.1 mm; Oil:58.650 kN; D:180 mm; Dynamic (Cr):4.5 mm; Pu:390 kN; with cylindrical bore:1 700 min-1; Static (Cor):8.3 mm; Grease:532 kN; with tapered bore:2 000 min-1; |
| Single row tapered roller bearings 32328 | Mass pillow block:30.8 kg; P90°:84.5 kN; N1:23.813 mm; End plug (suffix Y):EPR 11; P180°:58.7 kN; h:38.1 mm; P120°:53.4 kN; J min.:263.525 mm; RG:3/8 NPT; ba:40.481 mm; |
| Single row tapered roller bearings 33022 | H2:69.85 mm; S:4.763 mm; Ca:119.812 mm; Eye bolt:2 x 3/8-16 UNC; P60°:234 kN; Da:309.999 mm; Housing:SAW 534; A1:171.45 mm; RG:3/4 NPT; J min.:492.125 mm; |
| Single row tapered roller bearings 30320 | ra max.:4 mm; Basic dynamic load rating C:971 kN; a:117.76 mm; Calculation factor Y2:2.3; l:10 mm; Fatigue load limit Pu:143 kN; C:90 mm; r5 min.:1 mm; T:114 mm; Calculation factor Y1:1.6; |
| Single row tapered roller bearings 30264 | Fillet Radius rb:0.60 mm; Oil Speed Rating n2:7600 rpm; B:38.00 mm; Fillet Radius ra:1.00 mm; d:45.000 mm; Grease Speed Rating n1:5800 rpm; Basic Static Radial Load Rating Co:46500 N; D:85.0000 mm; Basic Dynamic Radial Load Rating C:49400 N; |
| Single row tapered roller bearings 31336 | B:60.00 mm; Basic Static Radial Load Rating Co:216000 N; D:160.0000 mm; d:90.000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:203000 N; Oil Speed Rating n2:5400 rpm; Grease Speed Rating n1:3800 rpm; Fillet Radius rb:1.00 mm; |
| Single row tapered roller bearings 30260 | d:100 mm; rs (min):2.1 mm; Oil:58.650 kN; D:180 mm; Dynamic (Cr):4.5 mm; Pu:390 kN; with cylindrical bore:1 700 min-1; Static (Cor):8.3 mm; Grease:532 kN; with tapered bore:2 000 min-1; |
| Single row tapered roller bearings 32060X | P60°:226 kN; A1:158.75 mm; Max. speed for Taconite seal:560 r/min; h:52.388 mm; Initial grease fill:793.8 g; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; Adapter sleeve assembly:SNW 32x5.7/16; P90°:136 kN; R2:33.337 mm; |
| Single row tapered roller bearings 32028X | P60°:226 kN; A1:158.75 mm; Max. speed for Taconite seal:560 r/min; h:52.388 mm; Initial grease fill:793.8 g; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; Adapter sleeve assembly:SNW 32x5.7/16; P90°:136 kN; R2:33.337 mm; |
| Single row tapered roller bearings 30321 | Basic Static Radial Load Rating Co:153000 N; Oil Speed Rating Open/Shielded n2:3400 rpm; Accessories:Two Shields & Snap-R; D:225.0000 mm; Oil Speed Rating n2:3400 rpm; d:105.000 mm; B:49.00 mm; Grease Speed Rating n1:2800 rpm; Sealed Speed Rating n3:2000 rpm; Basic Dynamic Radial Load Rating C:182000 N; |
| Single row tapered roller bearings 32964 | d:220 mm; Hydraulic nut:HMVC 44E; Mass adapter sleeve assembly:14.5 kg; B1:149.631 mm; d1:198.438 mm; B4:35.712 mm; d3 max.:279.527 mm; Threads per inch:8; Sleeve:S 44x7.13/16; Lock nut:N 44; |
| Single row tapered roller bearings 32924 | Ca:37.008 mm; S:3.175 mm; RG:1/4 NPT; PG:1/8 NPT; R2:21.431 mm; da:63.5 mm; H2:28.575 mm; Stabilizing ring:SR-15-0; Adapter sleeve assembly:SNW 15x2.1/2; Labyrinth ring:2 x LOR 38; |
| Single row tapered roller bearings 32020X | Fillet Radius rb:0.60 mm; Oil Speed Rating n2:7600 rpm; B:38.00 mm; Fillet Radius ra:1.00 mm; d:45.000 mm; Grease Speed Rating n1:5800 rpm; Basic Static Radial Load Rating Co:46500 N; D:85.0000 mm; Basic Dynamic Radial Load Rating C:49400 N; |
| Single row tapered roller bearings 32336 | a:60.556 mm; Reference speed:1600 r/min; d1 ≈:246.4 mm; T:46.038 mm; Basic static load rating C0:830 kN; Da min.:254 mm; Calculation factor e:0.5; D:279.4 mm; Mass bearing:8.98 kg; db min.:216.5 mm; |
Tapered Roller Bearings | Roller Bearings | Products | NSK
Bearings of this type use conical rollers guided by a back-face rib on the cone. ... Double-row and four-row tapered roller bearings are also available. Pressed
SKF Single row tapered roller bearing metric | ERIKS shop NL
The projection lines of the raceways meet at a common point on the bearing axis to provide true rolling and low friction. Single row tapered roller bearings are
Single row tapered roller bearings
This provides optimal load distribution, reduces noise and vibration, and enables preload to be set more accurately. A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved
Tapered Roller Bearings | The Timken Company
Inch Single Row. Single-row tapered roller bearings are the most basic and widely used, consisting of a cone assembly and a cup. Timken patented the first in
Tapered Roller Bearings | Fersa Bearings
Tapered roller bearings in metric and inch series. Flange side bearings. Single and double row. Thrust and steering bearings and U series. Fersa part numbers
Single Row Tapered Roller Bearings | Single Row TRB - NBC
The correct amount of radial and axial clearance is obtained by adjusting the two bearings against each other. Besides, double row and four row taper roller bearings are also widely used for heavy loads such as rolling mills. A single row taper roller bearing can be located endwise in one direction only
352219 Double Row Tapered Roller Bearing 95x170x100mm
352219 Taper Roller Wheel Bearing95mmx170mmx100mmOne Bearing 352219 Taper Roller Wheel Bearing, it is able to carry radial and axial load in one
Tapered roller bearings by FAG | Schaeffler Germany
FAG tapered roller bearings can support high radial and axial loads with X-Life Quality ➤ Inform now. ... Single-row tapered roller bearings. Single-row tapered
Double row tapered roller bearings
SKF manufactures double row tapered roller bearings in the TDO (fig. 1) and TDI (fig. 2) designs, in many variants and with different features (→ Designs and