| Single row tapered roller bearings 30344 | Fillet Radius rb:0.60 mm; Oil Speed Rating n2:7600 rpm; B:38.00 mm; Fillet Radius ra:1.00 mm; d:45.000 mm; Grease Speed Rating n1:5800 rpm; Basic Static Radial Load Rating Co:46500 N; D:85.0000 mm; Basic Dynamic Radial Load Rating C:49400 N; |
| Single row tapered roller bearings 30228 | d:220 mm; Hydraulic nut:HMVC 44E; Mass adapter sleeve assembly:14.5 kg; B1:149.631 mm; d1:198.438 mm; B4:35.712 mm; d3 max.:279.527 mm; Threads per inch:8; Sleeve:S 44x7.13/16; Lock nut:N 44; |
| Single row tapered roller bearings 32922 | K:6 mm; r5 min.:0.6 mm; rc max.:0.6 mm; Basic dynamic load rating C:432 kN; Fatigue load limit Pu:80 kN; 2B:64 mm; Da min.:177 mm; Ca min.:6 mm; Calculation factor Y1:1.9; Mass bearing pair:5.22 kg; |
| Single row tapered roller bearings 32988 | Ca:37.008 mm; S:3.175 mm; RG:1/4 NPT; PG:1/8 NPT; R2:21.431 mm; da:63.5 mm; H2:28.575 mm; Stabilizing ring:SR-15-0; Adapter sleeve assembly:SNW 15x2.1/2; Labyrinth ring:2 x LOR 38; |
| Single row tapered roller bearings 30226 | H2:69.85 mm; S:4.763 mm; Ca:119.812 mm; Eye bolt:2 x 3/8-16 UNC; P60°:234 kN; Da:309.999 mm; Housing:SAW 534; A1:171.45 mm; RG:3/4 NPT; J min.:492.125 mm; |
| Single row tapered roller bearings 32068 | ra max.:4 mm; Basic dynamic load rating C:971 kN; a:117.76 mm; Calculation factor Y2:2.3; l:10 mm; Fatigue load limit Pu:143 kN; C:90 mm; r5 min.:1 mm; T:114 mm; Calculation factor Y1:1.6; |
| Single row tapered roller bearings 32028X | d:220 mm; Hydraulic nut:HMVC 44E; Mass adapter sleeve assembly:14.5 kg; B1:149.631 mm; d1:198.438 mm; B4:35.712 mm; d3 max.:279.527 mm; Threads per inch:8; Sleeve:S 44x7.13/16; Lock nut:N 44; |
| Single row tapered roller bearings 31336 | Ca:37.008 mm; S:3.175 mm; RG:1/4 NPT; PG:1/8 NPT; R2:21.431 mm; da:63.5 mm; H2:28.575 mm; Stabilizing ring:SR-15-0; Adapter sleeve assembly:SNW 15x2.1/2; Labyrinth ring:2 x LOR 38; |
| Single row tapered roller bearings 30264 | Calculation factor f1:1; Calculation factor f2A:1; B:20 mm; Mass bearing:0.61 kg; Basic dynamic load rating C:23.8 kN; Static axial stiffness, preload class B:88 N/µm; d1:84.3 mm; Static axial stiffness, preload class A:57 N/µm; Fatigue load limit Pu:0.78 kN; da min.:76 mm; |
| Single row tapered roller bearings 32064X | Basic Static Radial Load Rating Co:153000 N; Oil Speed Rating Open/Shielded n2:3400 rpm; Accessories:Two Shields & Snap-R; D:225.0000 mm; Oil Speed Rating n2:3400 rpm; d:105.000 mm; B:49.00 mm; Grease Speed Rating n1:2800 rpm; Sealed Speed Rating n3:2000 rpm; Basic Dynamic Radial Load Rating C:182000 N; |
| Single row tapered roller bearings 32248 | ra max.:4 mm; Basic dynamic load rating C:971 kN; a:117.76 mm; Calculation factor Y2:2.3; l:10 mm; Fatigue load limit Pu:143 kN; C:90 mm; r5 min.:1 mm; T:114 mm; Calculation factor Y1:1.6; |
| Single row tapered roller bearings 32968 | d1 ≈:171 mm; da max.:151 mm; s max.:4.8 mm; Reference speed:2600 r/min; Calculation factor kr:0.15; F:155 mm; r3,4 min.:4 mm; da min.:131 mm; Angle ring:HJ 422; D:280 mm; |
| Single row tapered roller bearings 30344 | a:60.556 mm; Reference speed:1600 r/min; d1 ≈:246.4 mm; T:46.038 mm; Basic static load rating C0:830 kN; Da min.:254 mm; Calculation factor e:0.5; D:279.4 mm; Mass bearing:8.98 kg; db min.:216.5 mm; |
| Single row tapered roller bearings 32260 | Mass pillow block:30.8 kg; P90°:84.5 kN; N1:23.813 mm; End plug (suffix Y):EPR 11; P180°:58.7 kN; h:38.1 mm; P120°:53.4 kN; J min.:263.525 mm; RG:3/8 NPT; ba:40.481 mm; |
Tapered roller bearings by FAG | Schaeffler Germany
FAG tapered roller bearings can support high radial and axial loads with X-Life Quality ➤ Inform now. ... Single-row tapered roller bearings. Single-row tapered
Single Row Tapered Roller Bearings | Single Row TRB - NBC
The correct amount of radial and axial clearance is obtained by adjusting the two bearings against each other. Besides, double row and four row taper roller bearings are also widely used for heavy loads such as rolling mills. A single row taper roller bearing can be located endwise in one direction only
352219 Double Row Tapered Roller Bearing 95x170x100mm
352219 Taper Roller Wheel Bearing95mmx170mmx100mmOne Bearing 352219 Taper Roller Wheel Bearing, it is able to carry radial and axial load in one
SKF Single row tapered roller bearing metric | ERIKS shop NL
The projection lines of the raceways meet at a common point on the bearing axis to provide true rolling and low friction. Single row tapered roller bearings are
Tapered Roller Bearings | Fersa Bearings
Tapered roller bearings in metric and inch series. Flange side bearings. Single and double row. Thrust and steering bearings and U series. Fersa part numbers
Tapered Roller Bearings | The Timken Company
Inch Single Row. Single-row tapered roller bearings are the most basic and widely used, consisting of a cone assembly and a cup. Timken patented the first in
Single row tapered roller bearings
This provides optimal load distribution, reduces noise and vibration, and enables preload to be set more accurately. A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved
Double row tapered roller bearings
SKF manufactures double row tapered roller bearings in the TDO (fig. 1) and TDI (fig. 2) designs, in many variants and with different features (→ Designs and
Tapered Roller Bearings | Roller Bearings | Products | NSK
Bearings of this type use conical rollers guided by a back-face rib on the cone. ... Double-row and four-row tapered roller bearings are also available. Pressed