| Single row cylindrical roller bearings N321EM | Tolerance housing:H7; Tolerance shaft:h8; d:80 mm; Coefficient of friction µ min.:0.05; Permissible sliding velocity v min.:0.25 m/s; D:95 mm; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Mass bushing:1.04 kg; |
| Single row cylindrical roller bearings NJ1036EM | Shielded or Sealed B1:12.7 mm; D:54.0000 mm; Accessories:One Seal; Width Plain B:9.5 mm; Sealed Speed Rating n3:7900 rpm; Basic Dynamic Radial Load Rating C:12500 N; Oil Speed Rating Open/Shielded n2:14000 rpm; Grease Speed Rating Open/Shielded n1:11000 rpm; Fillet Radius ra:0.79 mm; Basic Static Radial Load Rating Co:7500 N; |
| Single row cylindrical roller bearings NU352M | Pu:59.600 kN; B1:48 mm; D:230 mm; Grease:2.020 kN; with tapered bore:1226 ; Static (Cor):129.780 kN; rs Dynamic (Cr):3 mm; with cylindrical bore:3 200 min-1; Oil:2 700 min-1; B:46 mm; |
| Single row cylindrical roller bearings NU1096 | Pu:59.600 kN; B1:48 mm; D:230 mm; Grease:2.020 kN; with tapered bore:1226 ; Static (Cor):129.780 kN; rs Dynamic (Cr):3 mm; with cylindrical bore:3 200 min-1; Oil:2 700 min-1; B:46 mm; |
| Single row cylindrical roller bearings NU230EM | Cap bolt, SAE grade:8; H1:88.9 mm; Pa:33.8 kN; P60°:138 kN; Stabilizing ring:SR-16-13; PG:1/8 NPT; End plug (suffix Y):EPR 9; A2:215.9 mm; Lock nut:AN 16; Initial grease fill:175.77 g; |
| Single row cylindrical roller bearings NJ2224M | Fillet Radius rb:1.00 mm; d:65.000 mm; Oil Speed Rating n2:3800 rpm; Grease Speed Rating n1:2700 rpm; Fillet Radius ra:2.00 mm; B:74.00 mm; Basic Dynamic Radial Load Rating C:212000 N; Basic Static Radial Load Rating Co:193000 N; D:160.0000 mm; |
| Single row cylindrical roller bearings NJ422M | d1 ≈:219.2 mm; d:170 mm; r3,4 min.:4 mm; B2:24 mm; Mass angle ring:1.8 kg; B1:12 mm; |
| Single row cylindrical roller bearings NU2968M | Grub (set) / Locking screw size:M 10; d3:165 mm; Recommended tightening torque:35 N·m; N1:6.4 mm; G:M 130x3; J2:17 mm; B:32 mm; J1:153 mm; d4:132 mm; Axial static load carrying capacity:920 kN; |
| Single row cylindrical roller bearings NU3884M | Shielded or Sealed B1:12.7 mm; D:54.0000 mm; Accessories:One Seal; Width Plain B:9.5 mm; Sealed Speed Rating n3:7900 rpm; Basic Dynamic Radial Load Rating C:12500 N; Oil Speed Rating Open/Shielded n2:14000 rpm; Grease Speed Rating Open/Shielded n1:11000 rpm; Fillet Radius ra:0.79 mm; Basic Static Radial Load Rating Co:7500 N; |
| Single row cylindrical roller bearings NU1022M | P150°:151 kN; R2:50.8 mm; H1:250.825 mm; Cap bolt recommended tightening torque:1017 N·m; P60°:449 kN; Mass pillow block:364 kg; J max.:749.3 mm; Labyrinth ring:2 x LOR 666; da:184.15 mm; Cap bolt:4 x 1 1/2-6 UNC; |
| Single row cylindrical roller bearings NU19/560 | Pu:59.600 kN; B1:48 mm; D:230 mm; Grease:2.020 kN; with tapered bore:1226 ; Static (Cor):129.780 kN; rs Dynamic (Cr):3 mm; with cylindrical bore:3 200 min-1; Oil:2 700 min-1; B:46 mm; |
| Single row cylindrical roller bearings NU1964M | rb max.:0.6 mm; Da min.:74 mm; F:57.5 mm; Da max.:75.4 mm; Basic dynamic load rating C:47.3 kN; Mass bearing:0.27 kg; r3,4 min.:0.6 mm; Basic static load rating C0:57 kN; Limiting speed:9500 r/min; Fatigue load limit Pu:7.2 kN; |
| Single row cylindrical roller bearings NU18/750 | P150°:151 kN; R2:50.8 mm; H1:250.825 mm; Cap bolt recommended tightening torque:1017 N·m; P60°:449 kN; Mass pillow block:364 kg; J max.:749.3 mm; Labyrinth ring:2 x LOR 666; da:184.15 mm; Cap bolt:4 x 1 1/2-6 UNC; |
| Single row cylindrical roller bearings NJ2940M | Tolerance shaft:f7 m/s; Permissible sliding velocity v max.:1 m/s; B1:1.5 mm; Coefficient of friction µ min.:0.08; D:23 mm; Coefficient of friction µ max.:0.15; d:20 mm; Mass bushing:0.017 kg; D1:30 mm; Tolerance housing:H7 m/s; |
Single row cylindrical roller bearings Industry Solutions : NTN
In the cylindrical roller bearing range, the single row roller bearing withstands high radial loads. The standard ISO ranges (NU,N,NJ, NF, NUP, NH, RNU, HJ) are
LARGE BEARINGS Cylindrical Roller Bearings - NTN Global
Table 1 Model and characteristics of the single row cylindrical roller bearings ... double row cylindrical roller bearing can support enormous radial and impact
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Single Row Cylindrical Roller Bearings - Electric Motor
Products 1 - 30 of 5251 - Single Row Cylindrical Roller Bearings are designed to support heavy radial loads and are some of the most common bearings used
Cylindrical Roller Bearings - Timken
The Timken® single-row emA series cylindrical roller bearings incorporate a unique cage design, proprietary internal geometry and special surface textures
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
There are different types designated as NU, NJ, NUP, N, NF (for single-row bearings), NNU, and NN (for double-row bearings depending on the design or
Single Row Cylindrical Roller Bearings, Single Row CRB
NBC Cylindrical roller bearings use rollers as rolling elements, and therefore have a higher load capacity in comparison to same dimension ball bearing
Single row cylindrical roller bearing applications | Bearing Tips
Apr 25, 2016 - Bearing manufacturer NKE Austria GmbH has released its series of single row cylindrical roller bearings – a bearing type on which many
Single row cylindrical roller bearings | SKF
SKF single row cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this