| Single row cylindrical roller bearings NU2288 | rb max.:0.6 mm; Da min.:74 mm; F:57.5 mm; Da max.:75.4 mm; Basic dynamic load rating C:47.3 kN; Mass bearing:0.27 kg; r3,4 min.:0.6 mm; Basic static load rating C0:57 kN; Limiting speed:9500 r/min; Fatigue load limit Pu:7.2 kN; |
| Single row cylindrical roller bearings NU260M | Tolerance shaft:f7 m/s; Permissible sliding velocity v max.:1 m/s; B1:1.5 mm; Coefficient of friction µ min.:0.08; D:23 mm; Coefficient of friction µ max.:0.15; d:20 mm; Mass bushing:0.017 kg; D1:30 mm; Tolerance housing:H7 m/s; |
| Single row cylindrical roller bearings N322EM | d1 ≈:219.2 mm; d:170 mm; r3,4 min.:4 mm; B2:24 mm; Mass angle ring:1.8 kg; B1:12 mm; |
| Single row cylindrical roller bearings NU2948M | Tolerance shaft:f7 m/s; Permissible sliding velocity v max.:1 m/s; B1:1.5 mm; Coefficient of friction µ min.:0.08; D:23 mm; Coefficient of friction µ max.:0.15; d:20 mm; Mass bushing:0.017 kg; D1:30 mm; Tolerance housing:H7 m/s; |
| Single row cylindrical roller bearings NU2838M | rb max.:0.6 mm; Da min.:74 mm; F:57.5 mm; Da max.:75.4 mm; Basic dynamic load rating C:47.3 kN; Mass bearing:0.27 kg; r3,4 min.:0.6 mm; Basic static load rating C0:57 kN; Limiting speed:9500 r/min; Fatigue load limit Pu:7.2 kN; |
| Single row cylindrical roller bearings NJ18/1120 | Tolerance shaft:f7 m/s; Permissible sliding velocity v max.:1 m/s; B1:1.5 mm; Coefficient of friction µ min.:0.08; D:23 mm; Coefficient of friction µ max.:0.15; d:20 mm; Mass bushing:0.017 kg; D1:30 mm; Tolerance housing:H7 m/s; |
| Single row cylindrical roller bearings NU19/850 | Cap bolt, SAE grade:8; H1:88.9 mm; Pa:33.8 kN; P60°:138 kN; Stabilizing ring:SR-16-13; PG:1/8 NPT; End plug (suffix Y):EPR 9; A2:215.9 mm; Lock nut:AN 16; Initial grease fill:175.77 g; |
| Single row cylindrical roller bearings NU10/530 | Reference speed:6300 r/min; da max.:53 mm; d:45.237 mm; r1,2 min.:3.5 mm; ra max.:3.5 mm; Basic dynamic load rating C:126 kN; Ca min.:4 mm; T:30.162 mm; Da min.:73 mm; Limiting speed:8000 r/min; |
| Single row cylindrical roller bearings NUP18/1320 | Pu:59.600 kN; B1:48 mm; D:230 mm; Grease:2.020 kN; with tapered bore:1226 ; Static (Cor):129.780 kN; rs Dynamic (Cr):3 mm; with cylindrical bore:3 200 min-1; Oil:2 700 min-1; B:46 mm; |
| Single row cylindrical roller bearings NF324M | Basic Static Radial Load Rating Co:143000 N; Fillet Radius ra:2.00 mm; d:160.000 mm; Accessories:Shield & Seal; B:38.00 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; Sealed Speed Rating n3:1600 rpm; Grease Speed Rating Open/Shielded n1:2400 rpm; Basic Dynamic Radial Load Rating C:143000 N; D:240.0000 mm; |
| Single row cylindrical roller bearings NJ18/800 | Fillet Radius ra:2.00 mm; D:160.0000 mm; Grease Speed Rating n1:4300 rpm; Oil Speed Rating Open/Shielded n2:5000 rpm; Oil Speed Rating n2:5000 rpm; d:75.000 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; Sealed Speed Rating n3:2800 rpm; Basic Static Radial Load Rating Co:76500 N; Accessories:One Shield; |
| Single row cylindrical roller bearings N28/710 | Shielded or Sealed B1:12.7 mm; D:54.0000 mm; Accessories:One Seal; Width Plain B:9.5 mm; Sealed Speed Rating n3:7900 rpm; Basic Dynamic Radial Load Rating C:12500 N; Oil Speed Rating Open/Shielded n2:14000 rpm; Grease Speed Rating Open/Shielded n1:11000 rpm; Fillet Radius ra:0.79 mm; Basic Static Radial Load Rating Co:7500 N; |
| Single row cylindrical roller bearings NU18/600 | Basic Static Radial Load Rating Co:143000 N; Fillet Radius ra:2.00 mm; d:160.000 mm; Accessories:Shield & Seal; B:38.00 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; Sealed Speed Rating n3:1600 rpm; Grease Speed Rating Open/Shielded n1:2400 rpm; Basic Dynamic Radial Load Rating C:143000 N; D:240.0000 mm; |
| Single row cylindrical roller bearings NU230EM | Cap bolt, SAE grade:8; H1:88.9 mm; Pa:33.8 kN; P60°:138 kN; Stabilizing ring:SR-16-13; PG:1/8 NPT; End plug (suffix Y):EPR 9; A2:215.9 mm; Lock nut:AN 16; Initial grease fill:175.77 g; |
Single row cylindrical roller bearings | SKF
SKF single row cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Single row cylindrical roller bearings Industry Solutions : NTN
In the cylindrical roller bearing range, the single row roller bearing withstands high radial loads. The standard ISO ranges (NU,N,NJ, NF, NUP, NH, RNU, HJ) are
LARGE BEARINGS Cylindrical Roller Bearings - NTN Global
Table 1 Model and characteristics of the single row cylindrical roller bearings ... double row cylindrical roller bearing can support enormous radial and impact
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
There are different types designated as NU, NJ, NUP, N, NF (for single-row bearings), NNU, and NN (for double-row bearings depending on the design or
Single Row Cylindrical Roller Bearings - Electric Motor
Products 1 - 30 of 5251 - Single Row Cylindrical Roller Bearings are designed to support heavy radial loads and are some of the most common bearings used
Single row cylindrical roller bearing applications | Bearing Tips
Apr 25, 2016 - Bearing manufacturer NKE Austria GmbH has released its series of single row cylindrical roller bearings – a bearing type on which many
Cylindrical Roller Bearings - Timken
The Timken® single-row emA series cylindrical roller bearings incorporate a unique cage design, proprietary internal geometry and special surface textures
Single Row Cylindrical Roller Bearings, Single Row CRB
NBC Cylindrical roller bearings use rollers as rolling elements, and therefore have a higher load capacity in comparison to same dimension ball bearing