| Single row cylindrical roller bearings NU19/600 | Tolerance housing:H7; Tolerance shaft:h8; d:80 mm; Coefficient of friction µ min.:0.05; Permissible sliding velocity v min.:0.25 m/s; D:95 mm; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Mass bushing:1.04 kg; |
| Single row cylindrical roller bearings NUP19/600 | Reference speed:6300 r/min; da max.:53 mm; d:45.237 mm; r1,2 min.:3.5 mm; ra max.:3.5 mm; Basic dynamic load rating C:126 kN; Ca min.:4 mm; T:30.162 mm; Da min.:73 mm; Limiting speed:8000 r/min; |
| Single row cylindrical roller bearings NU328EM | Cap bolt, SAE grade:8; H1:88.9 mm; Pa:33.8 kN; P60°:138 kN; Stabilizing ring:SR-16-13; PG:1/8 NPT; End plug (suffix Y):EPR 9; A2:215.9 mm; Lock nut:AN 16; Initial grease fill:175.77 g; |
| Single row cylindrical roller bearings NUP10/630 | Basic Static Radial Load Rating Co:143000 N; Fillet Radius ra:2.00 mm; d:160.000 mm; Accessories:Shield & Seal; B:38.00 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; Sealed Speed Rating n3:1600 rpm; Grease Speed Rating Open/Shielded n1:2400 rpm; Basic Dynamic Radial Load Rating C:143000 N; D:240.0000 mm; |
| Single row cylindrical roller bearings N39/1180 | rb max.:0.6 mm; Da min.:74 mm; F:57.5 mm; Da max.:75.4 mm; Basic dynamic load rating C:47.3 kN; Mass bearing:0.27 kg; r3,4 min.:0.6 mm; Basic static load rating C0:57 kN; Limiting speed:9500 r/min; Fatigue load limit Pu:7.2 kN; |
| Single row cylindrical roller bearings NJ236EM | Calculation factor Y0:1.4; d1 ≈:620 mm; D1 ≈:688 mm; Design variant/feature:TQO/GWI; Comparative radial load rating CF:2040 kN; r3,4 min.:6.4 mm; Comparative axial load rating CFa:472 kN; d:584.2 mm; Mass bearing:485 kg; D:762 mm; |
| Single row cylindrical roller bearings NU19/630 | rb max.:0.6 mm; Da min.:74 mm; F:57.5 mm; Da max.:75.4 mm; Basic dynamic load rating C:47.3 kN; Mass bearing:0.27 kg; r3,4 min.:0.6 mm; Basic static load rating C0:57 kN; Limiting speed:9500 r/min; Fatigue load limit Pu:7.2 kN; |
| Single row cylindrical roller bearings NU2330EM | Tolerance housing:H7; Tolerance shaft:h8; d:80 mm; Coefficient of friction µ min.:0.05; Permissible sliding velocity v min.:0.25 m/s; D:95 mm; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Mass bushing:1.04 kg; |
| Single row cylindrical roller bearings NJ222M | Cap bolt, SAE grade:8; H1:88.9 mm; Pa:33.8 kN; P60°:138 kN; Stabilizing ring:SR-16-13; PG:1/8 NPT; End plug (suffix Y):EPR 9; A2:215.9 mm; Lock nut:AN 16; Initial grease fill:175.77 g; |
| Single row cylindrical roller bearings NUP2326M | d1 ≈:219.2 mm; d:170 mm; r3,4 min.:4 mm; B2:24 mm; Mass angle ring:1.8 kg; B1:12 mm; |
| Single row cylindrical roller bearings NU3330M | Pu:59.600 kN; B1:48 mm; D:230 mm; Grease:2.020 kN; with tapered bore:1226 ; Static (Cor):129.780 kN; rs Dynamic (Cr):3 mm; with cylindrical bore:3 200 min-1; Oil:2 700 min-1; B:46 mm; |
| Single row cylindrical roller bearings NU2336M | rb max.:0.6 mm; Da min.:74 mm; F:57.5 mm; Da max.:75.4 mm; Basic dynamic load rating C:47.3 kN; Mass bearing:0.27 kg; r3,4 min.:0.6 mm; Basic static load rating C0:57 kN; Limiting speed:9500 r/min; Fatigue load limit Pu:7.2 kN; |
| Single row cylindrical roller bearings NJ18/1180 | Tolerance shaft:f7 m/s; Permissible sliding velocity v max.:1 m/s; B1:1.5 mm; Coefficient of friction µ min.:0.08; D:23 mm; Coefficient of friction µ max.:0.15; d:20 mm; Mass bushing:0.017 kg; D1:30 mm; Tolerance housing:H7 m/s; |
| Single row cylindrical roller bearings NU3240M | d1 ≈:219.2 mm; d:170 mm; r3,4 min.:4 mm; B2:24 mm; Mass angle ring:1.8 kg; B1:12 mm; |
Single Row Cylindrical Roller Bearings, Single Row CRB
NBC Cylindrical roller bearings use rollers as rolling elements, and therefore have a higher load capacity in comparison to same dimension ball bearing
Cylindrical Roller Bearings - Timken
The Timken® single-row emA series cylindrical roller bearings incorporate a unique cage design, proprietary internal geometry and special surface textures
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
LARGE BEARINGS Cylindrical Roller Bearings - NTN Global
Table 1 Model and characteristics of the single row cylindrical roller bearings ... double row cylindrical roller bearing can support enormous radial and impact
Single row cylindrical roller bearings Industry Solutions : NTN
In the cylindrical roller bearing range, the single row roller bearing withstands high radial loads. The standard ISO ranges (NU,N,NJ, NF, NUP, NH, RNU, HJ) are
Single Row Cylindrical Roller Bearings - Electric Motor
Products 1 - 30 of 5251 - Single Row Cylindrical Roller Bearings are designed to support heavy radial loads and are some of the most common bearings used
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
There are different types designated as NU, NJ, NUP, N, NF (for single-row bearings), NNU, and NN (for double-row bearings depending on the design or
Single row cylindrical roller bearings | SKF
SKF single row cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this
Single row cylindrical roller bearing applications | Bearing Tips
Apr 25, 2016 - Bearing manufacturer NKE Austria GmbH has released its series of single row cylindrical roller bearings – a bearing type on which many