| Single row cylindrical roller bearings NU2320M | Pu:59.600 kN; B1:48 mm; D:230 mm; Grease:2.020 kN; with tapered bore:1226 ; Static (Cor):129.780 kN; rs Dynamic (Cr):3 mm; with cylindrical bore:3 200 min-1; Oil:2 700 min-1; B:46 mm; |
| Single row cylindrical roller bearings NU1968M | d1 ≈:219.2 mm; d:170 mm; r3,4 min.:4 mm; B2:24 mm; Mass angle ring:1.8 kg; B1:12 mm; |
| Single row cylindrical roller bearings NJ2330EM | rb max.:0.6 mm; Da min.:74 mm; F:57.5 mm; Da max.:75.4 mm; Basic dynamic load rating C:47.3 kN; Mass bearing:0.27 kg; r3,4 min.:0.6 mm; Basic static load rating C0:57 kN; Limiting speed:9500 r/min; Fatigue load limit Pu:7.2 kN; |
| Single row cylindrical roller bearings N2344EM | Tolerance housing:H7; Tolerance shaft:h8; d:80 mm; Coefficient of friction µ min.:0.05; Permissible sliding velocity v min.:0.25 m/s; D:95 mm; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Mass bushing:1.04 kg; |
| Single row cylindrical roller bearings NU20/530 | d1 ≈:219.2 mm; d:170 mm; r3,4 min.:4 mm; B2:24 mm; Mass angle ring:1.8 kg; B1:12 mm; |
| Single row cylindrical roller bearings NU12/560 | d1 ≈:219.2 mm; d:170 mm; r3,4 min.:4 mm; B2:24 mm; Mass angle ring:1.8 kg; B1:12 mm; |
| Single row cylindrical roller bearings NJ1040EM | Pu:59.600 kN; B1:48 mm; D:230 mm; Grease:2.020 kN; with tapered bore:1226 ; Static (Cor):129.780 kN; rs Dynamic (Cr):3 mm; with cylindrical bore:3 200 min-1; Oil:2 700 min-1; B:46 mm; |
| Single row cylindrical roller bearings NU2288 | rb max.:0.6 mm; Da min.:74 mm; F:57.5 mm; Da max.:75.4 mm; Basic dynamic load rating C:47.3 kN; Mass bearing:0.27 kg; r3,4 min.:0.6 mm; Basic static load rating C0:57 kN; Limiting speed:9500 r/min; Fatigue load limit Pu:7.2 kN; |
| Single row cylindrical roller bearings NUP240EM | Shielded or Sealed B1:12.7 mm; D:54.0000 mm; Accessories:One Seal; Width Plain B:9.5 mm; Sealed Speed Rating n3:7900 rpm; Basic Dynamic Radial Load Rating C:12500 N; Oil Speed Rating Open/Shielded n2:14000 rpm; Grease Speed Rating Open/Shielded n1:11000 rpm; Fillet Radius ra:0.79 mm; Basic Static Radial Load Rating Co:7500 N; |
| Single row cylindrical roller bearings NU1984M | Grub (set) / Locking screw size:M 10; d3:165 mm; Recommended tightening torque:35 N·m; N1:6.4 mm; G:M 130x3; J2:17 mm; B:32 mm; J1:153 mm; d4:132 mm; Axial static load carrying capacity:920 kN; |
| Single row cylindrical roller bearings NU1984M | Cap bolt, SAE grade:8; H1:88.9 mm; Pa:33.8 kN; P60°:138 kN; Stabilizing ring:SR-16-13; PG:1/8 NPT; End plug (suffix Y):EPR 9; A2:215.9 mm; Lock nut:AN 16; Initial grease fill:175.77 g; |
| Single row cylindrical roller bearings NJ248M | Fillet Radius ra:2.00 mm; D:160.0000 mm; Grease Speed Rating n1:4300 rpm; Oil Speed Rating Open/Shielded n2:5000 rpm; Oil Speed Rating n2:5000 rpm; d:75.000 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; Sealed Speed Rating n3:2800 rpm; Basic Static Radial Load Rating Co:76500 N; Accessories:One Shield; |
| Single row cylindrical roller bearings NU10/530 | Tolerance shaft:f7 m/s; Permissible sliding velocity v max.:1 m/s; B1:1.5 mm; Coefficient of friction µ min.:0.08; D:23 mm; Coefficient of friction µ max.:0.15; d:20 mm; Mass bushing:0.017 kg; D1:30 mm; Tolerance housing:H7 m/s; |
| Single row cylindrical roller bearings NU2230EM | Cap bolt, SAE grade:8; H1:88.9 mm; Pa:33.8 kN; P60°:138 kN; Stabilizing ring:SR-16-13; PG:1/8 NPT; End plug (suffix Y):EPR 9; A2:215.9 mm; Lock nut:AN 16; Initial grease fill:175.77 g; |
Cylindrical Roller Bearings - Timken
The Timken® single-row emA series cylindrical roller bearings incorporate a unique cage design, proprietary internal geometry and special surface textures
Single Row Cylindrical Roller Bearings - Electric Motor
Products 1 - 30 of 5251 - Single Row Cylindrical Roller Bearings are designed to support heavy radial loads and are some of the most common bearings used
Single row cylindrical roller bearings Industry Solutions : NTN
In the cylindrical roller bearing range, the single row roller bearing withstands high radial loads. The standard ISO ranges (NU,N,NJ, NF, NUP, NH, RNU, HJ) are
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
There are different types designated as NU, NJ, NUP, N, NF (for single-row bearings), NNU, and NN (for double-row bearings depending on the design or
Single row cylindrical roller bearings | SKF
SKF single row cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this
LARGE BEARINGS Cylindrical Roller Bearings - NTN Global
Table 1 Model and characteristics of the single row cylindrical roller bearings ... double row cylindrical roller bearing can support enormous radial and impact
Single row cylindrical roller bearing applications | Bearing Tips
Apr 25, 2016 - Bearing manufacturer NKE Austria GmbH has released its series of single row cylindrical roller bearings – a bearing type on which many
Single Row Cylindrical Roller Bearings, Single Row CRB
NBC Cylindrical roller bearings use rollers as rolling elements, and therefore have a higher load capacity in comparison to same dimension ball bearing