Four point contact ball bearings QJF320MB

Four point contact ball bearings QJF1032MB	P60°:669 kN; R1:163.512 mm; Da:419.999 mm; R2:50.8 mm; Stabilizing ring:2 x A8819; PosiTrac Plus contact element:2 x B10724-607; Bearing:23056 CCK/W33; Ca:147.803 mm; Eye bolt:2 x 1/2-13 UNC; Pa:89 kN;
Four point contact ball bearings QJF228MB	Sealed Speed Rating n3:7500 rpm; Grease Speed Rating n1:11000 rpm; Basic Dynamic Radial Load Rating C:21200 N; Oil Speed Rating Open/Shielded n2:14000 rpm; Basic Static Radial Load Rating Co:10800 N; Oil Speed Rating n2:14000 rpm; Fillet Radius ra:1.00 mm; B:17.00 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; d:25.000 mm;
Four point contact ball bearings QJ324N2MA	Preload class C GC:1680 N; da min.:119 mm; Calculation factor f2A:1; Basic dynamic load rating C:111 kN; Db max.:165 mm; B:28 mm; rb max.:1 mm; d:110 mm; d1:128.5 mm; Fatigue load limit Pu:3.9 kN;
Four point contact ball bearings QJ1296N2MA	r2s (min):0.6 mm; rs (min):2 mm; d2:45 mm; r1s (min):1.5 mm; Dynamic (Ca):144 kN; T:38.25 mm; Pu:22.070 kN; a:25 mm; Static (Coa):181 kN; B:36 mm;
Four point contact ball bearings QJF1944X1MB	r1,2 min.:5 mm; b:16.7 mm; Mass bearing:260 kg; Calculation factor kr:0.35; Basic static load rating C0:7500 kN; B:243 mm; F:402 mm; rb max.:4 mm; Basic dynamic load rating C:4020 kN; D:580 mm;
Four point contact ball bearings QJF338MB	r1,2 min.:5 mm; b:16.7 mm; Mass bearing:260 kg; Calculation factor kr:0.35; Basic static load rating C0:7500 kN; B:243 mm; F:402 mm; rb max.:4 mm; Basic dynamic load rating C:4020 kN; D:580 mm;
Four point contact ball bearings QJ244N2MA	Oil Speed Rating n2:8000 rpm; Basic Static Radial Load Rating Co:30000 N; D:95.0000 mm; d:60.000 mm; Basic Dynamic Radial Load Rating C:35100 N; Fillet Radius rb:0.60 mm; Grease Speed Rating n1:6700 rpm; B:18.00 mm; Fillet Radius ra:1.00 mm;
Four point contact ball bearings QJ1092N2MA	Threads per inch:18; Lock washer:W 11; Hydraulic nut:HMVC 11E; B1:46.609 mm; d1:49.212 mm; d:55 mm; G:54.788 mm; Lock nut:N 11; Mass adapter sleeve assembly:0.36 kg; d3 max.:75.54 mm;
Four point contact ball bearings QJ1022MA	d:220.000 mm; Oil Speed Rating n2:1700 rpm; Basic Static Radial Load Rating Co:930000 N; B:102.00 mm; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:540000 N; Grease Speed Rating n1:1400 rpm; D:350.0000 mm;
Four point contact ball bearings QJF1048MB	r2s (min):0.6 mm; rs (min):2 mm; d2:45 mm; r1s (min):1.5 mm; Dynamic (Ca):144 kN; T:38.25 mm; Pu:22.070 kN; a:25 mm; Static (Coa):181 kN; B:36 mm;
Four point contact ball bearings QJF1084MB	P60°:669 kN; R1:163.512 mm; Da:419.999 mm; R2:50.8 mm; Stabilizing ring:2 x A8819; PosiTrac Plus contact element:2 x B10724-607; Bearing:23056 CCK/W33; Ca:147.803 mm; Eye bolt:2 x 1/2-13 UNC; Pa:89 kN;
Four point contact ball bearings QJ1024N2MA	Accessories:One Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:48800 N; D:90.0000 mm; Oil Speed Rating n2:6300 rpm; Basic Static Radial Load Rating Co:39000 N; Fillet Radius ra:1.00 mm; d:50.000 mm; B:30.20 mm; Sealed Speed Rating n3:4800 rpm; Grease Speed Rating n1:4800 rpm;
Four point contact ball bearings QJF1022X1MB	Sealed Speed Rating n3:7500 rpm; Grease Speed Rating n1:11000 rpm; Basic Dynamic Radial Load Rating C:21200 N; Oil Speed Rating Open/Shielded n2:14000 rpm; Basic Static Radial Load Rating Co:10800 N; Oil Speed Rating n2:14000 rpm; Fillet Radius ra:1.00 mm; B:17.00 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; d:25.000 mm;
Four point contact ball bearings QJF1092MB	Oil Speed Rating n2:8000 rpm; Basic Static Radial Load Rating Co:30000 N; D:95.0000 mm; d:60.000 mm; Basic Dynamic Radial Load Rating C:35100 N; Fillet Radius rb:0.60 mm; Grease Speed Rating n1:6700 rpm; B:18.00 mm; Fillet Radius ra:1.00 mm;

Four-point contact ball bearings | SKF

Four-point contact ball bearings are radial single row angular contact ball bearings with raceways that are designed to support axial loads in both directions. For a given axial load, a limited radial load can also be supported (Load ratio)

4 point contact ball bearings for industrial | Products

These items are high quality four point contact ball bearings, which can support radial loads and axial loads in both directions and so they can replace a pair/set of

Four point contact bearings QJ2 - medias

Four point contact bearings are single row, non-self-retaining radial ball bearings. They are similar in their structure to single row radial angular contact ball

Four-point contact ball bearings - Schaeffler Group

Four-point contact bearings are single-row angular contact ball bearings and therefore require significantly less space in an axial direction than double-row

4-Point Contact Angular Contact Ball Bearing - AEC

Four-point contact ball bearings have a single outer ring and a split inner ring. The raceway profiles are such that the ball contacts the outer ring at two points

Four Point Contact Ball Bearings | ISB Industries

ISB four point contact ball bearings are single row angular contact ball bearings with raceways designed to accommodate axial loads from both directions

Four point contact bearings for greater accuracy | Kaydon

A four-point contact ball bearing makes it easy to simplify machine designs that have a combination of radial, thrust and moment loads because it can handle all

Four-point contact ball bearings - Schaeffler