| TOKIME Japan vane pump SQP432-75-25-15-86CCC-18 | D:1180 mm; B:78 mm; s:440 mm; da min.:985 mm; Limiting speed:450 r/min; Minimum axial load factor A:290; r1,2 min.:9.5 mm; H:230 mm; Fatigue load limit Pu:3900 kN; d1 ≈:1099 mm; |
| TOKIME Japan vane pump SQP21-15-2-1CC-18 | A:58.737 mm; Mass bearing unit:4.54 kg; J:104.775 mm; N1:14.287 mm; L:136.525 mm; B:73.025 mm; d2:68.659 mm; s:25.4 mm; Limiting speed:4500 r/min; a:3.969 mm; |
| TOKIME Japan vane pump SQP21-14-6-86CD-18 | H:358.775 mm; Taconite seal:TER 158; P60°:345 kN; P90°:207 kN; da:180.975 mm; Housing:SAFS 040 KA; Cap bolt:1-8 UNC; P180°:133 kN; PG:1/4 NPT; H1:179.4 mm; |
| TOKIME Japan vane pump SQP432-66-32-12-86CCC-18 | S:0.794 mm; Mass bearing unit:4.22 kg; H:114.3 mm; J max.:180.975 mm; J min.:174.625 mm; Basic dynamic load rating C:77 kN; H2:33.337 mm; A1:80.169 mm; Attachment bolt diameter G:15.875 mm; H1:57.15 mm; |
| TOKIME Japan vane pump SQP432-38-30-12-86CCC-18 | b1:12.5 mm; Pu:10.060 kN; r1s (min):1.5 mm; rs (min):1.5 mm; Dynamic (Ca):79.4 kN; d2:70 mm; B:24 mm; s:1.6 mm; d2 (max):90.5 mm; b:7 mm; |
| TOKIME Japan vane pump SQP21-19-7-1CD-18 | H:358.775 mm; Taconite seal:TER 158; P60°:345 kN; P90°:207 kN; da:180.975 mm; Housing:SAFS 040 KA; Cap bolt:1-8 UNC; P180°:133 kN; PG:1/4 NPT; H1:179.4 mm; |
| TOKIME Japan vane pump SQP432-66-30-12-86CCC-18 | Initial grease fill:286.33 g; H:192.484 mm; RG:3/8 NPT; Appropriate attachment bolt size G:0.625 in; Mass pillow block:21.3 kg; J min.:263.525 mm; Stabilizing ring:2 x SR-1518; J max.:295.275 mm; R2:27.781 mm; Da:160 mm; |
| TOKIME Japan vane pump SQP432-38-21-15-86CCC-18 | S:0.794 mm; Mass bearing unit:4.22 kg; H:114.3 mm; J max.:180.975 mm; J min.:174.625 mm; Basic dynamic load rating C:77 kN; H2:33.337 mm; A1:80.169 mm; Attachment bolt diameter G:15.875 mm; H1:57.15 mm; |
| TOKIME Japan vane pump SQP2-10-1C-18 | D:300.0000 mm; Accessories:Two Seals; Basic Dynamic Radial Load Rating C:151000 N; B:38.00 mm; d:220.000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:1200 rpm; Oil Speed Rating Open/Shielded n2:2400 rpm; Basic Static Radial Load Rating Co:176000 N; Grease Speed Rating Open/Shielded n1:1900 rpm; |
| TOKIME Japan vane pump SQP21-19-3-1CD-18 | Initial grease fill:286.33 g; H:192.484 mm; RG:3/8 NPT; Appropriate attachment bolt size G:0.625 in; Mass pillow block:21.3 kg; J min.:263.525 mm; Stabilizing ring:2 x SR-1518; J max.:295.275 mm; R2:27.781 mm; Da:160 mm; |
| TOKIME Japan vane pump SQP21-19-14-1CD-18 | A:58.737 mm; Mass bearing unit:4.54 kg; J:104.775 mm; N1:14.287 mm; L:136.525 mm; B:73.025 mm; d2:68.659 mm; s:25.4 mm; Limiting speed:4500 r/min; a:3.969 mm; |
| TOKIME Japan vane pump SQP21-12-2-86AB-18 | D:1180 mm; B:78 mm; s:440 mm; da min.:985 mm; Limiting speed:450 r/min; Minimum axial load factor A:290; r1,2 min.:9.5 mm; H:230 mm; Fatigue load limit Pu:3900 kN; d1 ≈:1099 mm; |
| TOKIME Japan vane pump SQP21-10-9-1CC-18 | H:358.775 mm; Taconite seal:TER 158; P60°:345 kN; P90°:207 kN; da:180.975 mm; Housing:SAFS 040 KA; Cap bolt:1-8 UNC; P180°:133 kN; PG:1/4 NPT; H1:179.4 mm; |
| TOKIME Japan vane pump SQP2-15-1B-18 | D:1180 mm; B:78 mm; s:440 mm; da min.:985 mm; Limiting speed:450 r/min; Minimum axial load factor A:290; r1,2 min.:9.5 mm; H:230 mm; Fatigue load limit Pu:3900 kN; d1 ≈:1099 mm; |
Low noise fixed displacement vane pumps SQP/SQPS series
Comparison of Pump Pressure Pulsations. Vane Wear Comparison (Tokyo Keiki pumps). The SQP series are low-noise vane pumps offered in single, double, or
SQP Hydraulic Double Vane Pumps, Tokyo Keiki Inc
F11: Water glycol fluid. 2 Low noise double fixed displacement vane pumps. SQP(S)21 Series. SQP(S)31, 32 Series. SQP(S)41, 42, 43 Series. 3 Shaft end pump
SQP Hydraulic Single Vane Pumps, Tokyo Keiki Inc
F11: Water glycol fluid. 2 Low noise fixed displ. vane pump. SQP(S)1 Series. SQP(S)2 Series. SQP(S)3 Series. SQP(S)4 Series. 3 Pump displacement code
VQ Series Hydraulic Single Vane Pump, Tokyo Keiki Inc
2 High performance single fixed displacement vane pump for mobile applications. 25VQ Series. 35VQ Series. 45VQ Series. 3 Pump displacement code
Vane Pumps | TOKYO KEIKI U.S.A., INC
Triple fixed displacement vane pumps. The SQP series are low-noise vane pumps offered in single,double, or triple pumps, with 4 frame sizes, 16 series and
VV16 Series Variable Displacement Vane Pumps | TOKYO
Variable Displacement Vane Pumps; Energy Efficient Pump for Small Power Packs & Machine Tooling; Low Noise; Energy Efficient + Long Life; Strong Against
V-104,124,134,144 Series Single Vane Pump, Tokyo Keiki Inc
Fixed Displacement Vane Pumps. 1 Hydraulic fluid. Omit: mineral oil, water glycol (S36). F3: Phosphate ester fluid. 2 Fixed displacement vane pumps
SQP Vane Pumps | TOKYO KEIKI INC.(Formerly known
The SQP series are the best suited pump for indoor applications because of their Super-Quiet features. The standard SQP pumps are offered in single, double, or
SQP Hydraulic Triple Vane Pumps, Tokyo Keiki Inc
2 Low noise triple fixed displacement vane pumps. SQP211 Series. SQP311, 321 Series. SQP421, 431, 432 Series. 3 Shaft end pump displacement. 4 Middle