Timken TAPERED ROLLER BEARINGS H3038
With over 10170 full-service stores, our Timken TAPERED ROLLER BEARINGS H3038 24 Bore Diameter (mm) inventory is extensive and Pioneer Machinery Source our parts are priced right. within 24 hours. This helps you maximize your 24x9x7 productivity by saving time and your hard-earned dollars.
| Bearing number: | 709 ACD/P4AH |
| Size (mm): | 24x9x7 |
| Bore Diameter (mm): | 24 |
| Outer Diameter (mm): | 9 |
| Width (mm): | 7 |
| d: | 9 mm |
| D: | 24 mm |
| B: | 7 mm |
Product Details
| Bearing number | 709 ACD/P4AH |
| Size (mm) | 24x9x7 |
| Bore Diameter (mm) | 24 |
| Outer Diameter (mm) | 9 |
| Width (mm) | 7 |
| d | 9 mm |
| D | 24 mm |
| B | 7 mm |
| d1 | 14.1 mm |
| d2 | 14.1 mm |
| D1 | 18.9 mm |
| K | 0.5 mm |
| C1 | 4.25 mm |
| r1,2 - min. | 0.3 mm |
| r3,4 - min. | 0.2 mm |
| a | 7.4 mm |
| da - min. | 11 mm |
| db - min. | 11 mm |
| Da - max. | 22 mm |
| Db - max. | 22.6 mm |
| ra - max. | 0.3 mm |
| rb - max. | 0.2 mm |
| dn | 15.1 mm |
| Basic dynamic load rating - C | 3.4 kN |
| Basic static load rating - C0 | 1.5 kN |
| Fatigue load limit - Pu | 0.064 kN |
| Limiting speed for grease lubrication | 75000 r/min |
| Limiting speed for oil lubrication | 110000 mm/min |
| Ball - Dw | 3.969 mm |
| Ball - z | 10 |
| Gref | 0.18 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 20 N |
| Preload class B - GB | 40 N |
| Preload class C - GC | 80 N |
| Preload class D - GD | 160 N |
| Calculation factor - f | 1.02 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.02 |
| Calculation factor - f2C | 1.05 |
| Calculation factor - f2D | 1.08 |
| Calculation factor - fHC | 1 |
| Preload class A | 30 N/micron |
| Preload class B | 39 N/micron |
| Preload class C | 51 N/micron |
| Preload class D | 68 N/micron |
| r1,2 min. | 0.3 mm |
| r3,4 min. | 0.2 mm |
| da min. | 11 mm |
| db min. | 11 mm |
| Da max. | 22 mm |
| Db max. | 22.6 mm |
| ra max. | 0.3 mm |
| rb max. | 0.2 mm |
| Basic dynamic load rating C | 3.45 kN |
| Basic static load rating C0 | 1.53 kN |
| Fatigue load limit Pu | 0.064 kN |
| Attainable speed for grease lubrication | 75000 r/min |
| Attainable speed for oil-air lubrication | 110000 r/min |
| Ball diameter Dw | 3.969 mm |
| Number of balls z | 10 |
| Reference grease quantity Gref | 0.18 cm³ |
| Preload class A GA | 20 N |
| Static axial stiffness, preload class A | 30 N/µm |
| Preload class B GB | 40 N |
| Static axial stiffness, preload class B | 39 N/µm |
| Preload class C GC | 80 N |
| Static axial stiffness, preload class C | 51 N/µm |
| Preload class D GD | 160 N |
| Static axial stiffness, preload class D | 68 N/µm |
| Calculation factor f | 1.02 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.02 |
| Calculation factor f2C | 1.05 |
| Calculation factor f2D | 1.08 |
| Calculation factor fHC | 1 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.015 kg |
Company Profile
| Worktime |
7:00AM - 6:00PM |
| Phone |
0065 82577418 |
| Fax |
0065 82577552 |
